Gentoo NDK

From WebOS Internals
(Redirected from Building a cross toolchain)
Jump to navigation Jump to search

Install the latest version (sys-devel/crossdev-99999999) of crossdev: <source lang="bash"> echo 'sys-devel/crossdev **' >> /etc/portage/package.keywords emerge crossdev </source>

Setup some overlays for crossdev to write to and add PuffTheMagic's special overlay of custom ebuilds: <source lang="bash"> mkdir /usr/local/portage git clone git:// /usr/local/puff echo 'PORTDIR_OVERLAY="/usr/local/portage /usr/local/puff ${PORTDIR_OVERLAY}"' >> /etc/make.conf </source>

Building your toolchain (works for apps and kernels):

It's reported that you should NOT use GNU make newer than version 3.81 to compile the toolchain by User:Divilis[1]. Reference[2]

If you are using the GNU make 3.82, you should temporarily downgrade it with this command: <source lang="bash"> emerge -av =sys-devel/make-3.81 </source>

If you are already using GNU make 3.81, just continuous: <source lang="bash"> crossdev -t arm-none-linux-gnueabi --libc 2.6.1 --gcc 4.3.3-r2 --binutils 2.19.1-r1 --kernel 2.6.23-r3 </source>

Once the toolchain is built run the following command: <source lang="bash"> emerge-wrapper --init </source> This will setup '/usr/arm-none-linux-gnueabi' as your staging directory.

Mask some packages so that you compile against the proper versions: <source lang="bash"> echo '>=sys-libs/zlib-1.2.4' >> /usr/arm-none-linux-gnueabi/etc/portage/package.mask </source>