Custom Kernels v2
Revision as of 15:17, 13 August 2009 by PuffTheMagic (talk | contribs)
|
The directions on this page are for building a kernel for the Palm Pre using a armv7 cross toolchain. There are plenty of instructions on how to get a cross toolchain for the Pre so that will not be discussed here. If you don't already have a cross toolchain or don't know what one is,turn around now. |
Setup your environment:
export CROSS_COMPILE="armv7a-softfloat-linux-gnueabi-"
Get the kernel code:
git clone git://git.webosinternals.org/kernel.git
Get the default config:
cp arch/arm/configs/webos-internals .config
Configure the kernel:
ARCH=arm make menuconfig
Build the kernel:
make && make uImage