Difference between revisions of "Custom Kernels v2"
Jump to navigation
Jump to search
PuffTheMagic (talk | contribs) |
PuffTheMagic (talk | contribs) |
||
| Line 1: | Line 1: | ||
__NOTOC__ | __NOTOC__ | ||
{{Warning|The directions on this page are for building a kernel for the Palm Pre using a armv7 cross toolchain. There are plenty of instructions on how to get a cross toolchain for the Pre so that will not be discussed here. If you don't already have a cross toolchain or don't know what one is,turn around now.}} | {{Warning|The directions on this page are for building a kernel for the Palm Pre using a armv7 cross toolchain. There are plenty of instructions on how to get a cross toolchain for the Pre so that will not be discussed here. If you don't already have a cross toolchain or don't know what one is,turn around now.}} | ||
| + | |||
| + | |||
| + | ===== Setup your environment: ===== | ||
| + | <code language="sh"> | ||
| + | export CROSS_COMPILE="armv7a-softfloat-linux-gnueabi-" | ||
| + | </code> | ||
===== Get the kernel code: ===== | ===== Get the kernel code: ===== | ||
| Line 21: | Line 27: | ||
===== Build the kernel: ===== | ===== Build the kernel: ===== | ||
<code language="sh"> | <code language="sh"> | ||
| − | + | make && make uImage | |
</code> | </code> | ||
Revision as of 15:17, 13 August 2009
|
The directions on this page are for building a kernel for the Palm Pre using a armv7 cross toolchain. There are plenty of instructions on how to get a cross toolchain for the Pre so that will not be discussed here. If you don't already have a cross toolchain or don't know what one is,turn around now. |
Setup your environment:
export CROSS_COMPILE="armv7a-softfloat-linux-gnueabi-"
Get the kernel code:
git clone git://git.webosinternals.org/kernel.git
Get the default config:
cp arch/arm/configs/webos-internals .config
Configure the kernel:
ARCH=arm make menuconfig
Build the kernel:
make && make uImage