Difference between revisions of "Custom Kernels v2"

Revision as of 05:06, 13 August 2009

The directions on this page are for building a kernel for the Palm Pre using a armv7 cross toolchain. There are plenty of instructions on how to get a cross toolchain for the Pre so that will not be discussed here. If you don't already have a cross toolchain or don't know what one is,turn around now.

Get the kernel code:

git clone git://git.webosinternals.org/kernel.git

Get the default config:

cp arch/arm/configs/webos-internals .config

Configure the kernel:

ARCH=arm make menuconfig

Build the kernel:

CROSS_COMPILE="armv7a-softfloat-linux-gnueabi-" make

@@ Line 1: / Line 1: @@
+__NOTOC__
 {{Warning|The directions on this page are for building a kernel for the Palm Pre using a armv7 cross toolchain. There are plenty of instructions on how to get a cross toolchain for the Pre so that will not be discussed here. If you don't already have a cross toolchain or don't know what one is,turn around now.}}
 ===== Get the kernel code: =====
@@ Line 12: / Line 12: @@
 <code language="sh">
 cp arch/arm/configs/webos-internals .config
+</code>
+===== Configure the kernel: =====
+<code language="sh">
+ARCH=arm make menuconfig
+</code>
+===== Build the kernel: =====
+<code language="sh">
+CROSS_COMPILE="armv7a-softfloat-linux-gnueabi-" make
 </code>