Research Pre GSM Modem Protocol

From WebOS Internals
Revision as of 09:59, 20 October 2009 by StefanSchmidt (talk | contribs) (more infos about the protocol)
Jump to navigation Jump to search

Here we are collecting informations about the modem protocol. At the moment all the research is don on the european UMTS version of the Palm Pre. The CDM version is likely to be pretty similar to the UMTS variant with regards to the protocol.

What we are doing to get used to the protocol is to strace the different applications that talk to the modem and log everything that goes over /dev/modemuart to the actual modem. From this wire protocol traces we are working backwards to the actual protocol and packet format.

Packet Start

A new packet starts with: 0x7A

Packet End

A packet ends with: 0x7E

Escaping

For the packet end marker there is an escaping sequence inside the packet. It is used 0x7D 0x5E instead.

Header

No informations about the header format have been gathered yet.

Payload

No informations about the payload format have been gathered yet.


Checksum

The last two(?) bytes before the packet ending marker seem to be a CRC16 checksum. For now we think it is the CRC-16-CCITT variant.


Similarity to HDLC

The usage of CRC-16-CCITT but even more the frame boundary packet as well as the escaping for it looks similar to what we found about this protocol. Using HDLC would of course make sense and we need to do further investigation on this.