Difference between revisions of "Application:Xecutah"

Revision as of 22:52, 16 September 2011

« Go Back to the Utilities application list

Xecutah - Version: 0.9.0 (16 September 2011)

Summary

Xecutah allows you to start an X Windows System server in a webOS card, and run other X applications on that server. This app is available to the Pre, Pixi, Palm Pre2, Veer, and Touchpad (running 3.0.2).

Xecutah requires webOS 1.4.0 or later to function. Do not try to install it on earlier webOS versions, it will not work.

Key features

Related packages

XServer - Used to display X Windows applications on webOS
XTerm - Used to provide a Linux command-line interface on webOS.
Ubuntu Chroot - Provides chroot installation for Ubuntu OS
Debian Chroot - Provides chroot installation for Debian OS

Status

Xecutah has been upgraded to release status, and is no longer considered beta. Experimental updates can be found in the testing feeds. This are considered beta versions and potentially unstable.

License

Please be aware that org.webosinternals.xecutah is licensed under the GPLv2.

Code from Xecutah cannot be used by a closed source application. If you want to use them in a non-GPLv2 but otherwise open source application, please contact the authors.

Installing Xecutah

Open Preware
Let Preware update the packages
Type Xecutah (the letters will appear at the top in the header to indicate you are going to search.)
Press Enter
Open Xecutah package details by tapping on the Xecutah entry from the search
Tap Install at the bottom of the screen

Usage

Main

You can select which X-Windows application to execute from this screen.

Always start the XServer entry first before selecting your next selection.

Preferences

In the main section on the top bar on the left side is a menu that takes you to the preference screen. On the preference screen, you can select what type of theme for the Xecutah app to display in. The current options are Palm Default and Palm Dark.

Known bugs

No support for the ESC key yet

Changelog

For those interested, the full Changelog can be found here. Listed below is the Changelog since the public release.

0.9.0

Public release

Repository

Xecutah is housed in the applications/Xecutah git repository at http://git.webos-internals.org/

@@ Line 34: / Line 34: @@
 Xecutah has been upgraded to release status, and is no longer considered beta.
 Experimental updates can be found in the [http://www.webos-internals.org/wiki/Testing_Feeds testing feeds]. This are considered beta versions and potentially unstable.
-Some milestones worth mentioning in Xecutah's history include:
-* Since 16 September 2011, Xecutah was upgraded to public release.
-* 27 August 2011, support for Debian chroot (0.8.4)
-* 24 August 2011, Tweak support for keyboard and color (0.8.3)
-* 17 July 2011, support for Ubuntu chroot (update 0.8.0)
-* 14 July 2011, first alpha release (update 0.6.5)
 <BR>
@@ Line 52: / Line 44: @@
 == Installing Xecutah ==
-There are three supported methods for installing Xecutah: Official HP/Palm SDK, WebOS Quick Install, Stand Alone Installers, and Command Line.
-You do not need to access the Linux command line or "root your Pre" to install or use Xecutah.
-You ''cannot'' use fileCoaster, or PreLoad, or PreUpdate to install or update Xecutah.  Those tools are unable to operate correctly on advanced homebrew packages.
-If you are a developer who uses the Palm emulator, you should know that Xecutah works just as well on the Emulator as it does on a real device, and is installed in exactly the same way.
-<BR>
-=== Installing Xecutah with Preware ===
-These instructions are the most recommended for installing Xecutah.
 #Open [http://www.webos-internals.org/wiki/Application:Preware Preware]
@@ Line 72: / Line 51: @@
 #Open Xecutah package details by tapping on the Xecutah entry from the search
 #Tap Install at the bottom of the screen
-<BR>
-=== Installing Xecutah with WebOS Quick Install ===
-You can use version 4.1.1 or later of [http://forums.precentral.net/canuck-coding/274461-webos-quick-install-v4-3-1-a.html] to install Xecutah on any device easily and quickly, without the need to download a big 200MB SDK and webOSDoctor.
-'''Latest Version of WebOS Quick Install available here: [http://forums.precentral.net/canuck-coding/274461-webos-quick-install-v4-3-1-a.html WebOS Quick Install v4.3.1]'''
-# Install the required Software
-## [http://www.java.com/en/download/installed.jsp?detect=jre&try=1 Click here] to verify that you have the latest java installed on your computer and update if needed
-# Put your device in [[Getting started|Developer Mode]]
-# Connect your device to your computer with the USB cable, and select "Just Charge" or "Cancel" (on a Touchpad). Do not select USB Drive.
-# Run WebOS Quick Install. If the novacom driver is not installed, WebOS Quick Install will download and install that for you.
-## '''Do not believe any guide that says you need to download the SDK or webOSDoctor for WOSQI to run.''' The most you'll download is the novacom driver, which is only 11MB on Windows, and will be done via WOSQI.
-# If you are installing on a Veer, you will need to reboot the phone at this point or WOSQI will not recognize it. Hold the On/Off button down for about five seconds and release it. Select "Power" then select "Restart".
-# Click the third button on the right (the globe icon)
-# Select the Applications tab at the top
-# Search for Xecutah
-# Click Install.
-<BR>
-=== Installing Xecutah using the official HP/Palm SDK ===
-To install Xecutah on any webOS device, the following procedure is recommended if you're having problems with WebOS Quick Install:
-# Install the latest official Palm webOS SDK from http://developer.palm.com
-# '''Disconnect your device''' (I repeat, do not have your device connected, no cables in the device, device not even anywhere near the computer), and run the latest webOS Doctor to install or upgrade your Novacom drivers
-# Close the doctor
-# Your device should remain disconnected
-# Download the latest Xecutah package onto your computer from http://ipkg.preware.org/feeds/webos-internals/
-## To install Xecutah on a Pre, Pre2, or Touchpad, download the 'armv7' .ipk file
-## To install Xecutah on a Pixi, download the 'armv7' .ipk file
-## To install Xecutah on the emulator, download the 'i686' ipk file
-# Typing webos20090606, select the developer mode icon that will appear, and verify that your device is in developer mode
-# Connect your device to your computers USB port, and select 'Just Charge' (or 'Cancel' on your Touchpad)
-# If you are installing on a Veer, you will need to reboot the phone while connected to the computer, at this point, or it will not be recognized
-# Use palm-install to install the package you downloaded
-## Typically you can simply get a command line, navigate to the directory with the Xecutah package you downloaded, then type palm-install and.the.package.arm.name.ipk
-An example would be:
-<source lang="bash">
-palm-install org.webosinternals.xecutah_0.9.0_i686.ipk
-</source>
-<BR>
-=== Updating Xecutah ===
-To update Xecutah, just run Preware and select "Package Updates" from the main scene. If an update to Xecutah is available, it will appear in the list. Then select the "Update" button. Xecutah will close automatically after the update is complete.
-Alternatively, WebOS Quick Install provides a method for updates as well that is similar to Preware.
-Note that you cannot use fileCoaster, or PreLoad, or PreUpdate to install or update Xecutah.  Those tools are unable to operate correctly on advanced homebrew packages.
-<BR>
-=== Removing Xecutah ===
-''Why would you ever want to remove Xecutah?''
-To remove Xecutah on webOS 2.x or lower, hold the Orange button on your keypad and choose Xecutah from the Launcher. Choose Delete.
-For Touchpads (3.x), tap and hold the icon and click the "x" that appear on the icon. Choose delete.
 <BR>
@@ Line 169: / Line 88: @@
 == Repository ==
 Xecutah is housed in the applications/Xecutah git repository at http://git.webos-internals.org/
-For more information getting your application published in the WebOS Internals Source Code Repositories, please see the [[WebOS Internals Source Code Repositories]] page.  For commit permission to the open source project, contact rwhitby on #webos-internals or email [mailto:support@webos-internals.org support@webos-internals.org]