Difference between revisions of "Portal:Linux Applications Utilities"

Latest revision as of 20:23, 29 July 2009

« Go Back to the Linux application list
Lists all Applications that are utilities.

@@ Line 19: / Line 19: @@
 |list=
-{{portal-application-item
-|name=Terminal
-|site=http://www.precentral.net/how-about-command-line-terminal-your-pre
-|user=A Few
-|article=Terminal
-|category=Utilities
-|description=A Terminal for your Pre.
 }}
-}}
-== I don't want to delete this, but someone move it ==
-Call bootie Mode on your Palm Pre
-Power off your palm Pre first.
-Holding "Vol up" while connect the usb to PC.
-run "python novaproxy.py" (where you saved it in)
-Launch Putty, in Raw mode with 'Terminal -> Line discipline,
-Listen on 127.0.0.1 port 8023
-then click connect
-input "help" and enter in Putty
-you will get a list.....
-command list:
-nduid : get the device id *
-usb : usb transfer commands
-lboot : boot linux image
-klog : klog commands *
-printenv : print all of the environment variables
-getenv : read an environment variable
-setenv : set an environment variable
-reset : reset the device
-script : run a script at specified address
-run : run a script at from an environment variable
-return : return from current script
-help : this list
-version : get bootie version
-charging : commands to set charging states
-fsboot : boot current image based on environment
-chainboot : boot another bootloader image based on environment
-go : Jump to a given address with the given arguments
-cpurev : read the cpu revision
-diag : perform diag operations: write, boot, verify
-poweroff : power off completely