Difference between revisions of "Memboot"
Jump to navigation
Jump to search
(New page: = Memboot = Memboot is an option to boot the pre using an kernel supplied via usb and novacom, its quite useful as a second-last-option before doctoring, to remove a custom kernel which d...) |
|||
| (3 intermediate revisions by 3 users not shown) | |||
| Line 1: | Line 1: | ||
= Memboot = | = Memboot = | ||
| − | Memboot is an option to boot | + | Memboot is an option to boot webOS devices using a kernel supplied via usb and novacom, its quite useful as a second-last-option before doctoring, to remove a custom kernel which doesnt boot. |
Stuff you'll need: | Stuff you'll need: | ||
| Line 7: | Line 7: | ||
* Up-to-date SDK (especially novacom & novacomd) | * Up-to-date SDK (especially novacom & novacomd) | ||
* Up-to-date WebOS Doctor Image | * Up-to-date WebOS Doctor Image | ||
| − | * | + | * A little bit of knowledge and understanding of the next steps... But when you play with custom kernels, you should have that, right? |
From the WebOS Doctor Image you'll need to extract the (original) kernel, that has been installed on the device: | From the WebOS Doctor Image you'll need to extract the (original) kernel, that has been installed on the device: | ||
| Line 14: | Line 14: | ||
* inside, there is an archive /resources/webOS.tar - open/extract that one, too | * inside, there is an archive /resources/webOS.tar - open/extract that one, too | ||
* inside webOS.tar, there is an archive nova-cust-image-rootfs.tar.gz - open/extract that one | * inside webOS.tar, there is an archive nova-cust-image-rootfs.tar.gz - open/extract that one | ||
| − | * inside the rootfs, in /boot there'll be the uImage you're searching for. | + | * inside the rootfs, in /boot there'll be the uImage you're searching for. See below for some examples of uImages for various webOS versions. |
| + | * Copy the uImage to the novacom folder on your computer: | ||
| + | **for '''Windows''': program files\palm\sdk\bin | ||
| + | **for '''Linux''': /opt/Palm/novacom/ | ||
| − | + | Memboot is a feature of [[bootie]], the bootloader installed on the device. To get into bootie mode you must: | |
* power off the phone | * power off the phone | ||
* put in a USB cable connected to your computer | * put in a USB cable connected to your computer | ||
| − | * hold the volume up key, while powering on the | + | * hold the volume up key, while powering on the device |
| − | Now you should have that big usb-resembling | + | Now you should have that big usb-resembling logo on the screen: |
| − | Start the memboot using | + | *Start the memboot using the following command: |
| + | **On '''Linux''': (after opening a shell) | ||
| + | /opt/Palm/novacom/novacom boot mem:// < uImage-2.6.24-palm-joplin-3430 | ||
| + | **On '''Windows''' : (after running cmd.exe) | ||
| + | cd \program files\palm\sdk\bin | ||
| + | novacom boot mem:// < uImage-2.6.24-palm-joplin-3430 | ||
| − | + | (specify the name of YOUR kernel, of course) | |
| − | + | More Information: | |
| + | *Membooting Pre To Recover From Faulty/beta Kernels: http://www.rimweb.in/forums/topic/26437-membooting-pre-to-recover-from-faultybeta-kernels/ | ||
| + | *This will work with 2.1.0 as well -- the kernel has the same name but is a larger size. Make sure to use the correct version of the kernel to match the version of webOS installed. | ||
| + | |||
| + | uImage kernel names: | ||
| + | * 1.4.5: uImage-2.6.24-palm-joplin-3430 | ||
| + | * 2.1.0 (Pre2): uImage-2.6.24-palm-joplin-3430 | ||
| + | * 2.1.x/2.2x (Veer): uImage-2.6.29-palm-shank | ||
| + | * 2.2.x (Pre3): uImage-2.6.32.9-palm-rib | ||
| + | * 3.0.x (TouchPad): uImage-2.6.35-palm-tenderloin | ||
| + | * 3.0.x (TouchPad Go): uImage-2.6.35-palm-shortloin | ||
Latest revision as of 21:12, 11 February 2014
Memboot
Memboot is an option to boot webOS devices using a kernel supplied via usb and novacom, its quite useful as a second-last-option before doctoring, to remove a custom kernel which doesnt boot.
Stuff you'll need:
- Up-to-date SDK (especially novacom & novacomd)
- Up-to-date WebOS Doctor Image
- A little bit of knowledge and understanding of the next steps... But when you play with custom kernels, you should have that, right?
From the WebOS Doctor Image you'll need to extract the (original) kernel, that has been installed on the device:
- open the .jar file (rename it to .zip is a hint, if you don't know how to access the contents)
- inside, there is an archive /resources/webOS.tar - open/extract that one, too
- inside webOS.tar, there is an archive nova-cust-image-rootfs.tar.gz - open/extract that one
- inside the rootfs, in /boot there'll be the uImage you're searching for. See below for some examples of uImages for various webOS versions.
- Copy the uImage to the novacom folder on your computer:
- for Windows: program files\palm\sdk\bin
- for Linux: /opt/Palm/novacom/
Memboot is a feature of bootie, the bootloader installed on the device. To get into bootie mode you must:
- power off the phone
- put in a USB cable connected to your computer
- hold the volume up key, while powering on the device
Now you should have that big usb-resembling logo on the screen:
- Start the memboot using the following command:
- On Linux: (after opening a shell)
/opt/Palm/novacom/novacom boot mem:// < uImage-2.6.24-palm-joplin-3430
- On Windows : (after running cmd.exe)
cd \program files\palm\sdk\bin
novacom boot mem:// < uImage-2.6.24-palm-joplin-3430
(specify the name of YOUR kernel, of course)
More Information:
- Membooting Pre To Recover From Faulty/beta Kernels: http://www.rimweb.in/forums/topic/26437-membooting-pre-to-recover-from-faultybeta-kernels/
- This will work with 2.1.0 as well -- the kernel has the same name but is a larger size. Make sure to use the correct version of the kernel to match the version of webOS installed.
uImage kernel names:
- 1.4.5: uImage-2.6.24-palm-joplin-3430
- 2.1.0 (Pre2): uImage-2.6.24-palm-joplin-3430
- 2.1.x/2.2x (Veer): uImage-2.6.29-palm-shank
- 2.2.x (Pre3): uImage-2.6.32.9-palm-rib
- 3.0.x (TouchPad): uImage-2.6.35-palm-tenderloin
- 3.0.x (TouchPad Go): uImage-2.6.35-palm-shortloin